1

12-18

Engine Cylinder Working Condition Diagnosis Method

In some cylinders of the engine, the valve spring is too soft, the valve guide is stuck, the intake valve is too much carbon deposition, and the exhaust valve is ablated, resulting in the cylinder valve not closing tightly;

12-18

98% of people want to know how the precision stamping parts are designed?

1. A reasonable mold design is required. In the stamping die, the arrangement of the blanking sequence may affect the forming accuracy of precision stamping parts. For the blanking of small parts of precision stamping parts, generally a larger area of blanking is arranged first, and then a smaller area of blanking is arranged to reduce the impact of blanking force on the forming of precision stamping parts.

12-18

What are the design points of the progressive die for precision stamping parts?

The die fillet radius of the progressive die for precision stamping parts should be consistent in all directions. Otherwise, when bending, the billet will slide, and the product will be offset, which will affect the accuracy and size, and when designing the progressive die, the radius of the bending fillet should be selected appropriately, and should not be too large or too small. The size of the corner radius to cause local deformation or thinning of the product, affecting the quality and surface roughness of the product.

09-05

6 ways to improve the service life of precision stamping dies

Precision stamping die is a necessary process equipment in the stamping production process, which plays a decisive role in improving product quality, prolonging product life and improving production efficiency. However, it is difficult to meet production demands as stamping dies lose their working size due to frequent wear and tear during production. Therefore, it is critical to improve the durability (service life) of precision stamping dies.

09-05

How are metal stamping parts processed?

In our daily life, we often encounter various metal stamping parts, so how are these stamping parts processed? Here, I will take you to understand. .

09-05

How to reduce the cost of metal stamping parts

The competition in the stamping industry continues to increase, and many stamping plants are now facing continuous price reductions from downstream customers. Effectively reducing the cost of metal stamping parts has become an urgent problem for every stamping factory. So how should the stamping factory effectively and reasonably reduce the cost of metal stamping parts? Today I will give you a detailed analysis:

09-05

Engine fault light on causes and solutions!

During the driving process of the car, or the moment the car ignites, the car engine fault light on the dashboard lights up, usually as a red light or a yellow light. As long as it is on, it will never disappear manually in most cases. The case will disappear manually, this is the so-called engine malfunction light on.

09-05

BYD will build its first factory in Canada to produce electric trucks BYD will build its first factory in Canada to produce electric trucks

According to US media news on November 15, 2017, BYD will build a new electric truck factory in Ontario, Canada. This will be BYD's first factory in Canada.

09-05

New energy vehicles are the bright spot Jinan Commercial Vehicle Exhibition is about to open

There are auto shows every year, especially this year! I went to the Shanghai International Auto Show in the first half of the year and just came back from the Wuhan International Commercial Vehicle Show at the beginning of the month. No, the 10th Jinan International Commercial Vehicle Show is about to open again, and it's another visual feast for truck fans. If you missed the